Download our new GOTCHA! 3.06 video surveillance trialware. This is a 30 day free trialware which will run for about 30 minutes each time you restart the program. Download, install, and try it out. If you would like to have the 30 minute timelock disabled, then visit our secured ordering site. If you already have an earlier version of GOTCHA! 3.0 installed, simply install over it. You will not lose any files nor will you lose your registration codes if you are a current GOTCHA! 3.0 video surveillance customer.
Download GOTCHA! 3.06 trialware (3.22MB, rev 3.0.6.9)
IMPORTANT: If you are upgrading from a version of 3.0.6.5 or older please note the following: In this version GOTCHA! no longer creates the files lookout.bmp and gotcha.bmp. Instead GOTCHA! creates lookout.jpg and gotcha.jpg. So if you are uploading either lookout.bmp or gotcha.bmp you will need to change your setup to upload lookout.jpg or gotcha.jpg. Don't delete your old files until you have copied the properties of each to the new files.
Click here for Features and System Requirements
Click here for the Latest Changes and FAQs
Click here to backup GOTCHA! onto Diskettes
NOTE: This is the standard version of GOTCHA! which supports only ONE camera video input at a time. Visit the Security Solution page for more details on our multiple camera version of GOTCHA!.
This version of GOTCHA! includes a free Beta version of GView, which allows you to call into the remote site to view live or recorded video. Any feedback or problems with GView is much appreciated. It is highly recommended to use modems of the same brand name and model. Different modems tend to have incompability issues. There is no expiration date on GView Beta.
If you wish to have GOTCHA! saved onto floppy diskettes then download this self-extracting file and follow the directions below.
GOTCHA! 3.06 (diskette format) - g3069dsk.exe (3.07MB)
1. Download the file g3069dsk.exe shown above.
2. Run g3069dsk.exe.
3. The program, g3069dsk.exe, will automatically create three new directories (disk1, disk2, disk3) in your c:\windows\temp directory, unless you specify a different location. The program will then unzip the needed GOTCHA! setup files into these directories. At this point you can also install GOTCHA! by running the program setup.exe located in the "disk1" directory.
4. Get three empty formatted 1.44Mbytes floppy diskettes.
5. Label the first diskette "GOTCHA! 3.06 - Disk 1 of 3", the second diskette "GOTCHA! 3.06 - Disk 2 of 3", and the third diskette "GOTCHA! 3.06 - Disk 3 of 3".
6. Then copy the contents of the directory "disk1" onto the diskette labeled "GOTCHA! 3.06 - Disk 1 of 3", and then copy the contents of directory "disk2" onto the second diskette labeled "GOTCHA! 3.06 - Disk 2 of 3", and then the contents of the directory "disk3" onto the third diskette labeled "GOTCHA! 3.06 - Disk 3 of 3".
7. You may want to write protect each of the diskettes by moving the write-protect tab to the up position producing an open window.
Back to Top
Copyright 1996-2002 Prescient Systems. All rights reserved. Last updated April 8, 2002